In the production process, there will be a headache, that is, the collapse of the carton is not firmly bonded to the carton machine. The solution given by Tianjin Machinery is to improve the material of the cardboard, improve the compressive strength and moisture-proof performance, so as to reduce the collapse rate. In addition, the factory needs to improve the bonding strength, increase the solid content of starch paste, improve the hardness of cardboard by reducing the amount of glue, and solve the problem of carton bonding machine.

　　紙箱廠家應注意以下幾點:

　　The carton manufacturer should pay attention to the following points:

　　1、控制原紙的使用

　　1. Control the use of base paper

　　檢查瓦楞紙的尺寸，原紙的表面吸水性指數功效。如果原紙的表面施膠量差，吸水率就會偏高，很容易將手冷藏在低溫、潮濕的環境中，導致回潮、變軟，整理后抗壓強度降低。

　　Check the size of the corrugated paper, the surface water absorption index of the base paper. If the surface sizing of the base paper is poor, the water absorption will be high, and it is easy to refrigerate the hand in a low temperature and humid environment, resulting in moisture regain, softening, and reduced compressive strength after finishing.

　　2、紙板的制作要控制紙板的含水量

　　2. The water content of board should be controlled in the making of board

　　紙板的含水率不能過多，因?yàn)楹蚀螅埌宓挠捕鹊?，影響紙板的邊壓指?shù)。在紙板加工過程中，單面機和雙面機的上膠量不宜過大。一旦上膠量大，紙板就會變形，而瓦楞紙板的形狀直接影響紙板的邊緣壓力，邊緣壓力大，抗壓強度也會降低。

　　The moisture content of the paperboard can not be too much, because the moisture content is large, the hardness of the paperboard is low, which affects the edge pressure index of the paperboard. In the process of paperboard processing, the gluing amount of single side machine and double side machine should not be too large. Once the amount of glue is large, the paperboard will be deformed, and the shape of corrugated paperboard directly affects the edge pressure of the paperboard, the edge pressure is large, and the compressive strength will be reduced.

　　3、紙板粘合強度要大

　　3. Board bonding strength to be large

　　膠粘強度是瓦楞紙與紙張的結合力。如果硬紙板是假貼，經過壓縮后，其表面的紙張或瓦楞紙會與瓦楞紙分開，那么抗壓強度會直線下降。4. 生產過程中的間隙壓力控制要適度

　　Adhesive strength is the combination of corrugated paper and paper. If the cardboard is a fake paste, after compression, the paper or corrugated paper on its surface will be separated from the corrugated paper, then the compressive strength will drop in a straight line. 4. The gap pressure control in the production process should be moderate

　　特別要注意的是糊箱機的糊料間隙壓力不能太小，雙面機、模切機的陽輪間隙壓力要控制在合理的范圍內，以避免瓦楞紙板的坍塌，影響紙板的抗壓強度。

　　In particular, it should be noted that the paste gap pressure of the pasting machine should not be too small, and the gap pressure of the male wheel of the double-sided machine and the die-cutting machine should be controlled within a reasonable range to avoid the collapse of the corrugated board and affect the compressive strength of the board.

　　5、采用噴劑、防水輕質油等解決表面防水防潮問題。

　　5. Spray and waterproof light oil are used to solve the problem of surface waterproof and moisture-proof.

　　我公司的產品設計科學合理，優惠，質量上乘，經久耐用，長期受到廣大客戶的好評和好評，是客戶的良好選擇。

　　Our company's product design is scientific and reasonable, the price is preferential, the quality is excellent, durable, long-term by the majority of customers praise and praise, is a good choice for customers.